Minimate Pro Operator Manual
9
–15
3.
Within the
Record Mode
menu, press the
Up
or
Down
key to locate and highlight the
Record Mode
menu option.
4.
Press the
Right Arrow
key until the
Vibration Dose Value
option appears.
5.
Press the
Up
or
Down Arrow
key and highlight
VDV Weight File
.
6.
Press the
Right Arrow
key to select one of the weight files. The following
VDV
Weight Files
are available within
Blastware
for download to the unit: BW6841wb,
BW6841wd, BW6841we, BW6841wf, BW6841wg, and ISO2631.
Refer to each specific standard,
BS-6841
or
ISO-2631
for detailed information on each
weighting file, in regards to the wb, wd, we, wf, wg, and wm names.
NOTE:
Multiple
VDV Weight Files
can be downloaded from
Blastware
. Refer to the
Blastware Operator Manual
for more information on how to download weight files.
7.
Next, press the
Down Arrow
key to highlight
Monitor Channels
.
8.
Press the
Right Arrow
key to select the channel(s) of the geophone that you wish to
monitor (
Tran
,
Vert
,
Long
,
Tran/Vert
,
Vert/Long
,
Tran/Long
or
Tran/Vert/Long
).
This selection should be based on the time of day you are monitoring.
9.
Press the
Enter
key again to
Save
the new
Current Setup
by overwriting the name
displayed, or by creating a new
Setup File
name.
10.
Press the
Cancel
key to return to the
Ready to Monitor
display.
(1)2.
Dynamic Recording Information – Vibration Dose Value Record Mode
Viewing the
Dynamic Recording Information
displayed during the recording of a
Vibration Dose Value
recording session:
1.
Once the
Record Mode
has been selected, select
Start Monitor
NOTE:
A message,
Sensor Check
, will appear if it has been activated in the
Preferences
menu. Refer to
Sensor Check
under the
View/Edit Preferences
Section of
this manual to learn more about the feature and to determine when it will be activated.
The
Sensor Check
setting will determine when it will notify that it is occurring,
Before
Monitoring
or
After Event
, or not at all if it is
Disabled
.
2.
Every ten seconds the dynamic display will update the
Dose
and
RMS
values, with the
final values stored with the
Event
. Press the
Right Arrow
key to toggle between
Tran
Dose
,
Vert Dose
, and
Long Dose
, as shown below:
Summary of Contents for Minimate Pro Series
