Instantel Minimate Pro Series, Operator'S Manual

Page: 56 / 124

8
–12
Minimate Pro Operator Manual
NOTE : Different recording selections (i.e. Waveform or Histogram ) will produce a filename
with a different Type noted. In the picture above, two Events have a “ P
” as part of their
designation – this indicates that the Event was copied and subsequently „Processed‟ by using the
Tools and/or Process features of the
Blastware Advanced Module software.
NOTE : The LOG file type is a history of the monitoring activity; double-clicking on this file type
will display a Monitoring Log . The results for the Self Check feature will also appear here if you
have turned it on – please refer to the Self Check section of this manual for more information on
this diagnostic tool. An example Monitor Log is shown below:
Step 13: View an Event Report
You can view an Event or FFT Report by selecting an Event and clicking on the Event Report or
FFT Report icons provided in the toolbar. These reports can also be accessed by pre-selecting
them under the Window menu, using Auto Open – select the reports you would like to view
automatically by highlighting them with a check mark. The default is all reports. To
Advanced Waveform
Processed Waveform
Histogram
Processed Histogram
Waveform
Monitor Log