Minimate Pro Operator Manual
9
–35
installed and set to obtain the IP Address automatically from the
DHCP server.
Static IP Address
A set (non-dynamic) IP address. If you have a Static IP Address, it is
recorded in the DNS (Domain Name Server), which are servers
located throughout the Internet that handle the routing of Internet and
email. A Static IP Address remains unchanged, even when rebooting
your PC or Router. Obtain your Static IP from a local Internet
Service Provider.
Static IP Mask
Static IP Masks are used to separate IP networks into subgroups.
Obtain your Static IP Mask from a local Internet Service Provider.
Router
A Router is a device that acts as a gateway, controlling messaging for
communication and access to network resources, between a LAN and
a WAN.
(1)
Ethernet:
Turn this feature
On
or
Off
by following the directions below:
1.
Press the
Up
or
Down Arrow
key to highlight
Ethernet
.
2.
Press the
Right Arrow
key to access the
Ethernet
menu.
3.
Press the
Right Arrow
key to toggle between
On
and
Off
.
4.
Press the
Enter
key to save this setting.
(2)
Mode:
There are two
IP Address
modes to choose from to establish communications, a)
Automatic IP
, and b)
Static IP
. With the
Automatic IP
setting, the computer will
assign the address to your
Minimate Pro
. For
Static IP
, you must purchase an
IP
Address
from an Internet Service Provider, which usually involves a nominal monthly
payment, and then enter the number into the
Static IP Address
section.
1.
Press the
Down Arrow
key to highlight
Mode
.
2.
Press the
Right Arrow
key to toggle between
Automatic
or
Static IP
. Select
the
Mode
of communication you want to use.
3.
Press the
Enter
key to save this selection.
(3)
Static IP Address:
After you have purchased a
Static IP
from an Internet Service Provider, enter the number
in the
Static IP Address
field. The first 3 sets of numbers, divided by periods (Example:
192
.
196
.
001
.001), of the
Static IP
must match and be input into the PC TCP/IP network
setting for the Ethernet hardware, with the last number altered (Example:
192.168.001.
002
). The
Static IP
address
must match exactly
within the
Blastware
Communications
dialog. Refer to the
Blastware Operator Manual
for more detailed
information on setting up the
Static IP
.
4.
Press the
Down Arrow
key to highlight
Static IP Address
.
5.
Press the
Right Arrow
key to enter the editing mode.
6.
Press the
Right
and
Left
Arrow
keys, as required, to place the cursor under the
desired numeral.
7.
Press the
Up
or
Down
Arrow
keys to edit each field.
8.
Press the
Enter
key to save the new setting.
(4)
Static IP Mask:
After you have purchased a
Static IP
from an Internet Service Provider, enter the
supplied
Static IP Mask
number into the field, if applicable. LANs typically use the
255.255.255.0
Static IP Mask
.
1.
Press the
Down Arrow
key to highlight
Static IP Mask
.
2.
Press the
Right Arrow
key to enter the editing mode.
Summary of Contents for Minimate Pro Series
