Instantel Minimate Pro Series, Operator'S Manual

Page: 123 / 124

Minimate Pro Operator Manual
I

3
Operator Maintenance, 11–1
Overswing Ratio, 9–31
P
Password Protection, 9–39
Peak Acceleration, 12–3
Peak Displacement, 12–3
Peak Particle Velocity (PPV), 12–1
Peak Sound Pressure (PSP), 12–4
Peak Vector Sum (PVS), 12–3
Physical Attributes, 6–6
PPV, 9–24
Precautions, 3–1
Pressure Alarm Level, 9–22
Pressure Sensor, 9–16
Pressure Units, 9–32
Print the Event, 8–13
R
Range, 6–4
Real Time, 7–3
Record Mode, 9–5
Record Mode – Histogram, 9–9
Record Mode - Histogram Combo, 9–11
Record Mode - Vibration Dose Value (VDV), 9–14
Record Mode - Waveform, 9–5
Record Mode - Waveform Manual, 9–7
Record Stop Mode, 9–19
Record Time, 9–19
Record Times, 7–6
Recording Modes, 6–2
Recording times available on monitor, 9–21
Reference, 12–1
Registration Card, 1–1
Reload Operating System, 11–1
Remote Alarm, 6–3, 7–2
geo alarm level, 9–22
Remote Alarm Controller, 6–10, 9–22
Remote Connectivity, 6–8
Remove Offsets, 9–43
Replace Dust Caps, 11–1
Replace Power Adapter, 11–1
Report Options, 8–13
Reset to Factory Defaults, 9–40
Resolution, 6–4,
10–2
Response Standard,
10–2
Router,
9–35
RS-232 Communication Cable, 6–10
S
Sample Rate, 7–6, 9–18
Sample Rates, 6–9
Sampling Rate, 6–4
Sandbagging, 10–3
Scale Distance Graph, 9–24
Scaled Distance, 9–24
Select Modem, 9–36
Select Operator, 9–3
Select Setup File, 9–3
Self Check, 9–41
Sensor Check, 9–29
Sensor Check Overview –Geophones, 9–30
Sensor Density,
10–2
Sensor Specifications, 10–2
Sensors, 6–3, 10–1
Serial Baud Rate, 9–32
Set UTC Time from GPS, 9–38
Setup Communications, 8–4
Sinusoidal Waveforms, 12–4
Slow, 7–6
Soft Surface Installation, 10–3
Sound, 7–6
Sound Level Microphone, 7–4, 7–5, 7–6, 7–7, 7–8, 7–9,
9–43, 9–44
Sound Pressure, 12–4
analysis, 12–4
peak sound pressure (PSP), 12–4
zero crossing frequency (ZC Freq), 12–4
Sound Pressure Range,
10–2
Special Functions, 6–4
Specifications, 6–4
Square Root, 9–24
Start Monitor, 4–1, 9–22
Static IP,
9–35
Static IP Address, 9–35
Static IP Mask,
9–35
, 9–36
System Check, 2-1
Storage, 11–1
T
TCP/IP,
9–34
Time Format, 9–39
Transducer,
6–4
bolting, 10 – 4
hard surface installation, 10–4
installation, 10–2
installing using the ground spikes, 10–3
levelling plate, 6–10
sandbagging, 10–3
soft surface installation, 10–3
Triangular Waveforms, 12–5
Triaxial Geophone, 6–1
Trigger Level, 7–6, 9–18
Trigger Levels, 6–4
Turn the Unit On, 8–2