9
–20
Minimate Pro Operator Manual
Calculating a Recording Time
The total
Record Time
available depends upon the amount of available memory. The
unit checks your setup to determine the amount of available memory. If there is not
enough memory, a warning message appears and the
Record Time
defaults to the
maximum available. For approximate record times, refer to the table below:
Follow these steps to set the
Record Time
parameters:
(1)
Press the
Setup
key to access the
Main Menu
.
(2)
Press the
Down Arrow
key until
View/Edit Setup
is highlighted. Press the
Enter
key to access this menu selection.
(3)
Within the
Edit Current Setup
menu, press the
Down Arrow
key until the
Record Time
menu option is highlighted.
(4)
Press the
Right Arrow
key to access this menu selection.
(5)
The first selection is
Record Stop Mode
.
(6)
Press the
Right Arrow
key to toggle between
Auto Record
or
Fixed Time
.
(7)
Press the
Enter
key to
Save
the changes.
(8)
Use the
Down Arrow
keys to highlight
Record Time
.
(9)
Press the
Right Arrow
key to access the value field.
(10)
Press the
Up
or
Down Arrow
key to change the values within
Record Time
.
(11)
Press the
Enter
key to
Save
the changes.
(12)
Press the
Down Arrow
key to access the
Auto Window
setting.
(13)
Press the
Right Arrow
key to access the value field.
(14)
Press the
Up
or
Down Arrow
key to change the values within the
Auto
Window
field.
(15)
Press the
Enter
key to
Save
the changes, or the
Cancel
key to return to the
previous menu without saving the changes.
NOTE:
Approximate Monitor Record Times are listed below for each
Channel
and
associated
Sample Rate
:
Summary of Contents for Minimate Pro Series
