Minimate Pro Operator Manual
4
–1
4. U
NIT
L
ABEL
I
NSTRUCTIONS
4.1.
Condensed Instructions
Follow the
Condensed Instructions
, as shown below, and also displayed on the unit:
1.
Connect the Geophone and/or Microphone sensors to the unit. Position the unit and sensor(s) at the
desired locations.
2.
Turn the unit on by pressing
On/Off
(
Refer to Note A
).
3.
Check the
Battery Status
and
Memory
availability screen. Charge or use the supplied adaptor, as
required.
4.
When the
Ready to Monitor
screen appears, ensure that your sensor(s) are properly displayed
(
Refer to Note B
).
5.
To verify or edit
Setups
, press
Setup
. For additional setup information, refer to the
Minimate
Operator Manual
.
6.
Press
Start Monitor
to enter
Monitoring Mode
.
Note A:
If you have just received the unit, as a new product or from an
Authorized Instantel Service
and
Calibration Facility
, you must connect the battery by plugging in the
Instantel
AC adapter and pressing
the
On/Off
key. You can also connect the battery by simultaneously holding down the
Up Arrow
and
Enter
keys for 3 seconds. While still holding down these keys, press the
On/Off
key.
Note B:
If you change your sensors, it is important to update the system after they are connected by pressing
Sensor Check
.
IMPORTANT:
7.
Store the unit on charge when not in use for optimum battery performance.
8.
Refer to
Section 7, Basic Tutorial
, for step-by-step instructions to easily begin monitoring with your
Minimate Pro
.
4.2.
Battery, Shipping and Warranty Instructions
Prior to shipping the unit to an Authorized
Instantel
Service and Calibration Facility, the battery must
be disconnected by deactivating it through the
Minimate Pro
software interface. This is done
through a series of key presses, and does not require that the unit be opened. Follow the steps below:
1.
Press
Setup
.
2.
Select the
Maintenance Menu
.
3.
Select
Disconnect Battery
by pressing the
Right Arrow
key; the battery disconnects and the
unit turns off.
WARNING:
Only use the recommended
Instantel
AC Adapter to maintain optimum battery
performance. This product contains no user-serviceable parts. The Operator is
NOT
to replace the
battery. For additional information, refer to this manual.
Summary of Contents for Minimate Pro Series
