7
–6
Minimate Pro Operator Manual
6.
The microphone windscreen does not affect the microphone response and is acoustically
transparent.
NOTE:
Some microphone windscreens can attenuate the response – it is recommended
that this is confirmed prior to using any windscreens other than the one
provided with the Sound Level Microphone.
7.6.3. Sound Level Microphone
– Unit Compliance Setup
1.
The Sound Level Microphone can be configured directly on the Minimate Pro4 or
Minimate Pro6 monitor, or in Blastware.
2.
If the unit has already been configured for Sound Level Microphones, they will appear on
the Channel of the display that corresponds with the connector that the microphone(s) are
attached.
3.
Once the Compliance setup file has been downloaded into a monitor, it can be edited in
the
View/Edit Setup File
menu. Compliance Setup files end with a “.nsb” file extension.
4.
On the monitor, press
Setup
.
5.
Press the
Down Arrow
and select the
View/Edit Setup File
menu.
6.
Scroll down to the
Pressure Channel (
or
Vibration Channel
, dependent on the setup
file configuration
)
and press the
Right Arrow
to access the sensor options.
7.
Select the
Sound Level Microphone
sensor.
8.
Press the
Down Arrow
and locate the
Sound Mic Setup
menu option.
9.
Press the
Right Arrow
to enter this menu and edit the
Mic Weighting
and
Mic
Response
.
a.
Press the
Right Arrow
to select either
A
or
C Weighting
.
b.
Press the
Down Arrow
to select the
Mic Response
option.
c.
Press the
Right Arrow
to select either
Fast
or
Slow
.
d.
Press
Enter
to accept the new settings or
Cancel
to return to the
Setup
menu.
10.
Within the
Setup
menu, ensure that the
Sample Rate
,
Trigger Level
and
Record Times
are also set correctly.
11.
Press
Enter
to save any changes made.
NOTE:
Refer to the Blastware Operator Manual for information on editing the setup
within the software module.
7.6.4. Sound Level Microphone
– Unit Advanced Setup
1.
Two Sound Level Microphones can only be completely configured in Blastware,
including the
Trigger Level
,
Mic Weighting (Unfiltered)
, and
Mic Response
. These
must be set in the Blastware Advanced Module and downloaded to the unit as a Setup
File. Advanced Setup files end with a “.nsa” file extension. Refer to the Blastware
Operator Manual on how to set these variables.
2.
If the unit has already been configured for a Sound Level Microphone(s) it will appear on
the main display, as follows (if two are connected):
Vibration 1:
Sound, Vert, Long
Vibration 2:
Sound
3.
The current setup file is displayed in the top right corner when the unit displays the
Ready to Monitor
message. If this file is not the correct file, press
Setup
and select the
Select Setup File
menu.
4.
Press
Down Arrow
until the correct setup file is highlighted.
5.
Press
Enter
to open the options window.
6.
Press
Enter
to
Select as Current Setup
option. The monitor displays the message that
the selected file is now current.
7.
Press
Cancel
to exit the
Select Setup File
menu.
8.
Press
Cancel
again to return to the
Ready to Monitor
display.
NOTE:
The channel name on the Main Display (i.e. Sound) can only be changed using
the Blastware program.
Summary of Contents for Minimate Pro Series
