Page 6
EN
Chapter 2 Safety
1.3.3.1 Exercising claims
In the event of a warranty claim, send the entire machine,
along with the invoice, to our headquarters in Waldshut-
Tiengen.
Contact our free INOTEC service hotline beforehand on
+49 7741 6805 777.
1.3.3.2 Warranty claims
Claims apply only where material or manufacturing faults
exist and where machinery has been used properly. Wear
parts are not covered by the warranty. All claims shall be-
come void if third-party parts are installed, where the ma-
chinery has been improperly used or stored and in the event
of obvious non-compliance with the operating manual. In
this connection, we refer you to our General Terms of Busi-
ness.
1.3.4 Carrying out repairs
Repairs may only be carried out by employees at our
INOTEC service centres.
2 Safety
2.1 Intended use
• The inoBEAM F30 is used to convey pumpable and
paste-like materials (mineral or organic products) with
a particle size of up to a maximum of 6 mm. Feed the
delivery pump exclusively with paste-like material (e.g.
with material in buckets). The material is transported
to the rotor/stator via the pump shaft.
• The material is pumped to the processing location by
means of mortar hoses. There it is either poured onto
the floor or applied to walls or ceilings with the appro-
priate spray guns or glue guns.
• Only use the machine within its limits of application
and according to the technical data.
• Pay particular attention to the safety and warning
notices outlined in this original operating manual.
!
DANGER
Failure to use the
inoBEAM F30 properly could put the user’s
life and limb at risk and damage the
inoBEAM F30 or other assets.
Safety requirements for mortar delivery machines (suction
pumps) can be found in the following standards, among
others:
• Industrial Safety Regulation, accident prevention regu-
lations “Principles of Prevention” (BetrbSichV, BGV A1)
incl. the explanations and specifications of BGR A1.
• BG 183, rule of the German Employer's Liability Insur-
ance Association for the Construction Industry, mortar
conveying and mortar spraying machines.
• DIN EN 12001, conveying, spraying and distribution
machines
• For concrete and mortar - Safety requirements; German
version EN 12007
!
WARNING
Danger due to misuse!
Misuse of the inoBEAM F30 may lead to dangerous
situations.
• Never use the inoBEAM F30 delivery pump to create
other products, such as food.
• Never operate the inoBEAM F30 delivery pump using
values outside the ranges specified in the “Technical
Data”.
