Page 10
EN
Chapter 3 Technical data
2.4 Personnel qualification
INOTEC offers training sessions on operating the
inoBEAM F30. Use INOTEC service for the initial commis-
sioning of the machine; this also serves as an opportunity
to provide operators with training on how to operate the
mixer.
!
DANGER
If the inoBEAM F30 is operated by unqual-
ified individuals, this could put the life and health of
the operating staff at risk and cause property damage
to the inoBEAM F30 or other assets.
2.5 Responsibility of the operator
• Only task trained or instructed staff with operating the
inoBEAM F30.
• Define employees’ responsibilities for operating, setting
up, maintaining and servicing the machine clearly.
• Only task untrained staff or individuals who have not re-
ceived any instruction with operating the machine when
there is a trained or instructed specialist available to su-
pervise them.
• Work on the electronic control system may only be per-
formed by a qualified electrician.
HIGH
PRESSURE
!
DANGER
At high operating pressure,
pulling the trigger of the spraying device
causes a recoil force of up to 15 N.
• Be prepared for this recoil force oth-
erwise your hand may be pushed back
or you may lose your balance. This can
cause significant injuries.
2.6 Personal protective equipment (PPE)
!
CAUTION
PPE – particularly gloves, safety boots,
safety clothing, a safety helmet, safety goggles, hear-
ing protection and respiratory protection – must be
used.
HIGH
PRESSURE
!
WARNING
ATTENTION:
Risk of injury due to injection!
The spraying pressures created by the
high-pressure pump are extremely high!
1. Never touch the spray with your fingers,
hands or other parts of your body.
2. Look for weaknesses or leaks in the high
pressure hose. Never try to seal leaking
material with your hands, shoes or with
a cloth.
3. Never point the spray gun at yourself,
other people or animals.
4. Never use the spray gun without the
spray guard.
5. Before each operation, make sure that
the trigger lock on the gun is working.
Flip the trigger safety on the gun when-
ever spraying is interrupted.
6. In case of injury, do not treat this spray
injury as a harmless cut. In the event of a
skin injury caused by coating materials or
solvents, seek medical attention imme-
diately for rapid, specialised treatment.
Inform the doctor about the coating ma-
terial or solvent used.
