96-06434-00-01 revA
Service Manual, Inogen One G3HF
-99-
Figure 4: Front filter body screws and tubing
1.
Unscrew the two screws attaching the filter body to the compressor on the underside of
the device with a 4mm Allen wrench (Figure 5).
Figure 5: Compressor screws
5. Carefully slide the filter body out of the chassis to remove.
Instructions for Replacing the Filter Body:
1.
To replace the filter body housing, place the Overmolded mount on top of the filter body
housing. Torque the four screws to 6 in-lbs. in the following order (Figure 6).
Tubing
