96-06434-00-01 revA
Service Manual, Inogen One G3HF
-118-
Figure 6: Spring and spring nest
assembly
3. Make sure the tabs on the sides of the spring nest are closest to the chassis before
orienting the other end of the spring onto the circular spring attachment on the
column latch.
4. Carefully press down on the spring nest and spring to set the spring nest tabs into
the grooves in the chassis (Figure 7).
Figure 7: Properly seated spring nest and column
latch
5. If the column latch isn’t fully seated against the bottom of its space in the chassis
as shown in Figure 7, push the column further into the device until it clicks in
place.
6. If replacing both column latches, repeat procedure for the other column latch.
