Ingersoll-Rand ReliaTel, Manual, Page: 43 / 176

RT-SVD03L-EN 43
Table 7. RTOM discharge air heat setpoint
(continued)
Voltage (Vdc) Setpoint (ºF)
2.25 140
2.26 141
2.28 142
2.29 143
2.3 144
2.32 145
2.33 146
2.34 147
2.36 148
2.37 149
2.4 150
Table 8. RTOM supply air reheat setpoint
Voltage (Vdc) Setpoint (ºF)
0.002 65
0.169 65.5
0.317 66
0.395 66.5
0.552 67
0.672 67.5
0.785 68
0.915 68.5
1.028 69
1.114 69.5
1.206 70
1.275 70.5
1.365 71
1.445 71.5
1.525 72
1.61 72.5
1.683 73
1.766 73.5
1.822 74
1.887 74.5
1.94 75
1.998 75.5
2.064 76
2.118 76.5
2.175 77
2.196 77.5
2.234 78
2.275 78.5
2.318 79
2.368 79.5
2.415 80
Table 9. RTOM dehumidification setpoint
Voltage (Vdc) Setpoint (%)
0.002 40
0.238 41
0.445 42
0.539 43
0.677 44
0.811 45
0.984 46
1.117 47
1.245 48
1.349 49
1.428 50
1.552 51
Table 9. RTOM dehumidification setpoint (continued)
Voltage (Vdc) Setpoint (%)
1.625 52
1.745 53
1.824 54
1.853 55
1.929 56
1.978 57
2.07 58
2.136 59
2.184 60
2.259 61
2.268 62
2.324 63
2.397 64
Discharge Air (DA) Cooling -
Setpoint Lower Limit
Voyager ™ ™ Light Commercial
eFlex ™ units will utilize a discharge air cool limit
potentiometer located on the RTOM (R-136).
N No otte e:: This is not a DA setpoint, but a DA setpoint lower
limit.
Adjust the limit potentiometer by measuring the R-136
potentiometer test point loop to ground and comparing
it to the chart shown here.
N No otte e:: 50° to 55°F for most applications.
Table 10. Voyager ™ ™ DA cool limit temp/voltage
°F VDC
40 0.1
41 0.2
42 0.3
43 0.4
44 0.55
45 0.7
46 0.8
47 0.95
48 1.05
49 1.15
50 1.25
51 1.3
52 1.35
53 1.45
54 1.55
55 1.65
56 1.7
57 1.75
58 1.83
59 1.9
60 1.95
61 2
62 2.05
63 2.1
64 2.13
65 2.17
66 2.21
R Re elliia aT Te ell ™ ™ O Op pttiio on n M Mo od du ulle e ((R RT TO OM M))