2
Form MHD56406 Edition 2
Only allow
Ingersoll Rand
trained Technicians to perform maintenance on this product. For additional information contact
Ingersoll Rand
factory or nearest Distributor.
For additional supporting documentation refer to Table 1 on page 2 for Product Information Manuals.
Manuals can be downloaded from www.ingersollrandproducts.com.
The use of other than genuine
Ingersoll Rand
replacement parts may result in safety hazards, decreased performance and increased maintenance and will invalidate all
warranties.
The original language of this manual is English.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.
Table 1: Product Manuals
PRODUCT DESCRIPTION
Description
The
Compact Lift Air Chain Hoists (CLK)
are air powered and designed for
industrial, assembly and general utility applications.
CLK
air hoists can be hook-
mounted to the suspension shaft of a trolley, permanent mounting structure or any
mounting point capable of supporting both load and hoist.
The air supply line can be strung to the hoist using cable hangers, cable trolleys or
any festooning system that will ensure the air line remains free of kinks or sharp
bends and is protected from being pinched or crushed by other equipment.
The
CLK
air hoists are in conformity, when equipped with optional ‘e-stop’, with the
most recent European Standards. Only models with a
CE
marking on the data (name)
plate, located on the end of the hoist body, meet these requirements.
CE
models
carry a mechanism classification 1Am/M4, and an ATEX rating of II 3 GD c IIB 135°C
X. Refer to Product Safety and Maintenance Information Manuals for further
explanation.
SPECIFICATIONS
Table 2: General Specifications
Note:
CLK
air hoists are designed for lifting with a 5:1 minimum safety factor at rated load.
Publication
Part/Document Number Publication
Part/Document Number
Product Safety Information Manual
MHD56295
Product Maintenance Information Manual
MHD56408
Product Parts Information Manual
MHD56407
Model Code Explanation
Example: CL250K-2C10-C6U-E
CL250K
2
C
10
C
6
U
E
Series (Capacity):
CL250K
= 250 kg (551 lbs), single fall
CL125K
= 125 kg (276 lbs), single fall
CL500K
= 500 kg (1,102 lbs), double fall
Control:
0
= No Pendant
2
= 2 Button Pendant
Top Suspension:
A
= Lug Mount
C
= Swivel Top Hook
DA
= Rigid Trolley
Load Chain Lift:
10
= foot (standard)
X
= Specify length
Bottom Suspension:
C
= Swivel Snap Hook
Pendant Control Drop:
6
= 6 ft (standard)
X
= Specify Length (maximum 40 ft [12.2 m])
Options:
U
= Fabric Chain Container
E
= Emergency Stop
Hoist
Models
Rated Capacity
Load
Chain
Falls
Pressure
Air Flow
Chain
Size
mm
Wt. of Chain
Unit Net Wt. with
Standard 10 ft
(3 m) Lift
Sound
Pressure
Level
kg
lbs
psi
bar
scfm
m³/min
per ft (lb)
per metre (kg)
lbs
kg
dB(A)
CL125K
125
276
1
90
6.2
32
0.91
4 x 12 DAT
0.24
0.35
34
15.4
75
CL250K
250
551
1
38
17.2
CL500K
500
1,102
2
Sound measurements are in accordance with ISO 11204 and ISO 3746 test specifications for sound from pneumatic equipment.
Hoist Performance at 90 psi (6.2 bar) Air Pressure
Hoist
Models
Rated Capacity
Max. Lifting Speed @ Rated Load
Lifting Speed @ No Load
Max. Lowering Speed @ Rated Load
kg
lbs
ft/min
m/min
ft/min
m/min
ft/min
m/min
CL125K
125
276
43
13.1
56
17.1
37
11.3
CL250K
250
551
32
9.8
45
13.7
CL500K
500
1,102
15
4.6
26
7.9
23
6.7
Summary of Contents for CL125K
Page 96: ...www ingersollrandproducts com...