Ecotron - Incubation Shaker
Accessories
Page
36
of
90
03 May 2018
4.3 Box for Microtitre Plates
Overview
The box for microtitre plates is used for low-vapour cultivation of
microtitre plates and deep well plates. It protects cultures from
drafts in the incubation chamber and also offers a stable container
in which cultures can be transported.
The box for microtitre plates consists of an aluminium container
with a removable lid into which a replaceable paper filter is inte-
grated. A microtitre insert with screw-mounted pins is used for
mounting microtitre plates and deep well plates.
For shaking, the box for microtitre plates can be screwed onto a
universal table tray or placed on the «Sticky Stuff» adhesive mat-
ting.
Structure
1 Filter
2 Top plate
3 Microtitre insert
4 Quickload spacers
5 Container
6 Filter washer
Mounting the box for microtitre plates
The box for microtitre plates is mounted on the table by means of
four Phillips-head screws. When delivered, the fastening screws
are covered with plastic cap nuts. These must be removed prior to
installation.
Alternatively, the box for microtitre plates can be placed on «Sticky
Stuff» adhesive matting. In this case, all fastening screws must be
removed to avoid damaging the adhesive matting.
During installation, ensure that the tray is always loaded evenly.
1
2
3
4
5
6
