Ecotron - Incubation Shaker
Operation
03 May 2018
Page
61
of
90
6.
Detach the cable from the shaker to the control rack and pull it
out of the cable duct. To detach the plug, you have to push
the release lever at the bottom of the plug.
7.
Loosen the four hexagon bolts (M8x25) that affix the casing to
the X-frame of the shaker.
8.
Lift the casing on the two side handles and completely lift it off
the shaker.
The casing can now be used as standalone tempering cover.
To re-assemble the shaker, proceed in reverse order.
