Ecotron - Incubation Shaker
Operation
Page
50
of
90
03 May 2018
Screw sizes
ATTENTION
If screws that are too long or too short are used to affix the hold-
ers, the holders cannot be mounted properly on the table. Not
properly mounted holders can become loose during operation
and therefore lead to property damage.
– If you have to replace lost fastening screws, you must use
screws that comply with the specification below.
Steel clamps
Flask size
Screw
Flat gasket
25 – 50 mL
Flat head screw with Phil-
lips head M4 x 6 A4
D = 3.2 x 12 x 0.5
100 – 5000 mL Flat head screw with Phil-
lips head M4 x 8 A4
D = 3.2 x 12 x 0.5
Plastic clamps
Flask size
Screw
Flat gasket
100 – 500 mL
Flat head screw with Phil-
lips head M4 x 6 A4
D = 3.2 x 12 x 0.5
Test tube holders
Size
Screw
Flat gasket
Ø 8 – 30 mm
Oval head screw with Phil-
lips head M4 x 6 A2
D = 3.2 x 12 x 0.5
Boxes for microtiter plates
Screw
Flat gasket
Oval head screw with Phillips head
M4 x 12 A2
D = 3.2 x 12 x 0.5
