Ecotron - Incubation Shaker
Transport and Storage
Page
40
of
90
03 May 2018
5.3 Transporting the Equipment
Transport when delivered (packaged equipment)
Depending on its features and destination, the equipment is either
delivered on an oversized special pallet or in a sea crate. For
transport to the assembly location or longer transports in general,
we recommend transporting the equipment with a forklift or trolley.
Observe the following:
The equipment may only be transported using a forklift or trol-
ley if the equipment is still on the original pallet.
When lifted, the pallet must lay flat on the fork of the forklift or
on the trolley.
When unloading the equipment, make sure that the equipment
is very carefully lowered vertically onto the ground. Avoid ab-
rupt set down.
Observe the symbols on the packaging for correct transport.
Transport within the plant (unpacked equipment)
When transporting unpacked equipment, observe the following:
Always work in pairs and use suitable auxiliary equipment
when transporting the equipment (weight of the equipment
without cooling and tray: 63 kg).
The handles on the left and right of the equipment are only for
lifting up the equipment and not suitable for transport (risk of
tipping).
Prior to moving the equipment, transport fasteners (foam
wedges) must be inserted to prevent uncontrolled movements
of the table.
5.4 Storing the equipment
Decontaminate, thoroughly clean and dry the equipment every
time before placing it in storage.
Store the equipment clean, dry and protected against dust, dirt
and liquids.
Protect the equipment from aggressive media, direct sunlight
and vibrations.
Store the equipment in a cool place with low humidity but pro-
tected from frost.
Storage temperature: 10 °C to 35 °C.
Relative humidity, non-condensing: 10 % - 85 %.
