39
1. LOCAL SITE NUMBER
Set local IP address and site number of host matrix CPU in this
menu (Please refer to section 5.7.1.1 for details).
2. REMOTE SITE IP ADDRESS
Only the IP address of the host matrix switcher requires setup in
this menu (please refer to section 5.7.1.3 for details).
The IP addresses of other sites can be downloaded from host matrix
switcher via network. On the keyboard (PROGRAM mode)
connected to the satellite matrix switcher, enter “30,F2” or “33,F2”
command to download. Additionally, user can enter “30,F2” or
“33,F2” command on the keyboard (PROGRAM mode) connected
to host matrix to download or enter “100 + non-host site number
value+ F2” to download from single site.
5.7.3 Non-host Matrix Switcher Download Setup
The network download setup menu of non-host matrix switcher is
shown below:
MAIN SELECTION
DOWNLOAD SETTING
RETURN MAIN
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 SATELLITE
6 BACKUP
7 DOWNLOAD
8 LANGUAGE
1 DOWNLOAD TOUR: Y
2 DOWNLOAD SALVO: Y
When Y is selected by DOWNLOAD TOUR and DOWNLOAD
SALVO, the non-host matrix switcher will download setup tour and
salvo from the host matrix switcher simultaneously during
downloading data from host matrix.
Note:
only the non-host matrix switcher has the option of
“DOWNLOAD”.
5.8 System Backup
The BACKUP menu enable user to backup all the program data in
the system and to restore the backup program data, or to restore the
factory set Details as shown below:
Item
Function
A
BACKUP
PROGRAM
DATA
Backups system program data.
To backup program data,
1)
Move the cursor to the entry.
2)
Press the ACK key to confirm. Then a message “PRESS 22 ACK TO BACKUP” will
appear under the menu. Press “22+ACK” to backup data. Then the message
“BACKING…” will appear, which indicates the system is saving program data. If backup
is successful, the message “BACKUP SUCCESS” will appear; else, “BACKUP ERROR”
will appear.
Item
Function
B
RESTORE
BACKUP
Restore the backup program data.
To restore backup data,
1)
Move the cursor to the entry.
2)
Press the ACK key to confirm. Then a message “PRESS 33 ACK TO RESTORE” will
appear under the menu. Press “33+ACK” to restore data. Then the message
“RESTORE…” will appear, which indicates the system is restoring backup program data.
If the system is restored successfully, the message “RESTORE SUCCESS” will appear;
else, “RESTORE ERROR” will appear.
Item
Function
C
RESTORE
FACTORYSET
Restore the factory set.
To restore factory set
1)
Move the cursor to the entry.
2)
Press the ACK key to confirm. Then a message “PRESS 33 ACK TO RESTORE” will
appear under the menu. Press “33+ACK” to restore factory set. Then the message
“RESTORE…” will appear, which indicates the system is restoring factory set.
