26
NUM: the camera number in a camera group. Up to 9999 cameras
can be set in a camera group. Please NOTE that all the cameras in
the camera group use pseudo cameras.
PSEUDO: the pseudo number of camera in the group.
Note: The menu is not available for non-host matrix switcher.
5.3.7 Set Priority and Users
The SET PRIORITY AND USERS menu is used to configure login
mode, priority levels and users (in user login mode). The menu is as
shown below:
Note:
non-host matrix switcher can set login mode, but can not set
priority levels and users.
SET PRIORITY AND USER
1 SET PRIORITY
2 SET USER
PREVIOUS MENU
SYSTEM
RETURN MAIN
1 SET TIME AND DATE
2 SET SYSTEM TOURS
3 SET SYSTEM SALVOS
4 SET EVENT TIMERS
5 SET ALARM
6 SET SOURCE GROUPS
7 SET PRIORITY AND USERS
5.3.7.1 Set Login Mode
SET PRIORITY AND USER
2 SET PRIORITY
PREVIOUS MENU
1 SET LOGIN MODE
SET LOGIN MODE
PREVIOUS MENU
LOGIN MODE - KEYBOARD
The LOGIN MODE provides two options: KEYBOARD and
USER. When “USER” is selected, the “SET USER” entry will be
added to “SET PRIORITY AND USER” menu. The SET USER
entry is used to set users (max 64), and to assign priority for the
users.
5.3.7.2 Set Priority
SET PRIORITY
LEVEL 1
ADD USER Y
SYSTEM RESET Y
LOCK CAM ABILITY N
UTILIZE V/C ACCESS
MENU ACCESS Y
CHANGE PARAMETERS Y
PREVIOUS MENU
A
B
C
D
E
F
G
SET PRIORITY AND USER
1 SET PRIORITY
2 SET USER
PREVIOUS MENU
The SET PRIORITY menu (shown above) is used to configure each
of the 99 priority levels. Upon initial setup, all the 99 levels are
defaulted with the same configurations.
Item
Function
A
LEVEL
Selects the level to configure.
To select a level,
1)
Move the cursor to the entry;
2)
Enter the desired level number (01-99) on the numeric keypad;
3)
Press the ACK key to select.
Item
Function
B
ADD USER
Determines whether the user can add a new user into the system.
Options
Y = yes (to enable the user to add a new user into the system);
N = no (to restrict the user from adding a new user).
Use the ACK key to select.
Note
To use this function, the USER IDS must be enabled first (see
Section
5.3.7.2
).
Item
Function
C
SYSTEM RESET
Enables or disables the System Reset (see
Section 4.1
) ability for the user/keyboard.
Options
Y = yes (to enable the user/keyboard to reset the system);
N = no (to prevent the user/keyboard from resetting the system).
Use the ACK key to select.
Item
Function
D
LOCK CAM
ABILITY
Decides whether the Camera Lockout ability (see
Section 4.6
) is allowed for the user/keyboard.
Options
Y = yes (to give the user/keyboard the Camera Lockout ability);
N = no (to disable the Camera Lockout ability for the user/keyboard).
Use the ACK key to select.
Item
Function
E
View/Control
Defines the Keyboard-to-Camera View/Control ability for the user/keyboard.
Options
