Infinova V2923ACN Series, Installation & Operation Instructions

Page: 36 / 56

30
5.4.3 Monitor Status
1 ATTRIBUTE
2 FUNCTION
3 STATUS
MONITOR
RETURN MAIN
PREVIOUS MENU
MON SITE CAM ST TOUR V S
001 --- 0001 H --- - -
002 --- 0002 H --- - -
003 --- 0003 H --- - -
004 --- 0004 H --- - -
005 --- 0005 H --- - -
006 --- 0006 H --- - -
007 --- 0007 H --- - -
008 --- 0008 H --- - -
MONITOR STATUS
Select the STATUS from the MONITOR menu to access the
Monitor Status menu. A single menu screen displays status
information for 8 cameras. The CLOSE/OPEN keys can be used for
page-down/page-up.
The menu screen displays the following information of monitors:
MON SITE CAM ST TOUR V S
001 --- 0001 H --- - -
MONITOR STATUS
A B C D E F
Item Function
A
MON
Refers to the monitor in the system.
B
SITE
Indicates the remote site number currently being controlled.
C
CAM
Indicates the local or remote camera that is currently displayed on the monitor.
D
ST
Displays the monitor status, i.e.,

H (Hold);

R (Run);

A (Alarmed);

S (Salvo).
E
TOUR
Indicates the tour that is currently running on the monitor.
F
V S
Indicates the Loss Detection Diagnostics for video (V) and sync (S) (This function will be
available when DBVL modules are present in the system.):
Y = yes (video/sync signal is present);
N = no (video/sync signal loss occurred).
Sample Menu
MON SITE CAM ST TOUR V S
001 --- 0015 R 001 Y Y
002 --- 0021 H 002 Y Y
MONITOR STATUS
The sample menu indicates that:

Monitor 1 is displaying Camera 15, and is in a Run status in Tour 01.

Monitor 2 is displaying Camera 21, and is in a Hold status in Tour 02.

No video or sync signal is lost.
5.5 Camera Menu
The CAMERA menu (shown below) is used to assign a Pseudo
(logical) number to each camera, to create or change the camera's
title information, to set the camera/keyboard priority level, to set
camera/user priority, to perfor batch Pseudo camera setting, and to
clear camera title and pseudo camera settings.
The default CAMERA menu is shown below:
MAIN SELECTION
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 SATELLITE
6 BACKUP
7 LANGUAGE
RETURN MAIN
1 PSEUDO
2 TITLE
3 CAMERA/KEYBOARD
4 BATCH PSEUDO
5 CLEAR SETTING
CAMERA
When the LOGIN MODE is set to USER, the menu will be
displayed as follows:
MAIN SELECTION
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 SATELLITE
6 BACKUP
7 LANGUAGE
RETURN MAIN
1 PSEUDO
2 TITLE
3 USER/CAMERA
4 BATCH PSEUDO
5 CLEAR SETTING
CAMERA
When the use of a port is set to “VIDEO LOSS” in the “PORTS”
menu (see Section 5.6), the video loss detection function is enabled.
Then the camera menu will be shown as below: