27
UTILIZE V/C ACCESS
= User/Keyboard with such priority level is allowed to view or
control the camera according to the settings in menu 3.3 (CAMERA/KEYBOARD). For
detailed configuration information, please refer to 5.5.3 section CAMERA/KEYBOARD.
OVERRIDE VIEW CONTROL
= User/Keyboard is not allowed to view or control all
the cameras in the system, no matter what other settings are.
Use the ACK key to select.
Item
Function
F
MENU ACCESS
Enables or Disables the Menu Access ability for the user/keyboard.
Options
Y = yes (to give the user/keyboard the Menu Access ability);
N = no (to disable the Menu Access ability for the user/keyboard).
Use the ACK key to select.
Item
Function
G
CHANGE
PARAMETERS
Determines whether the user/keyboard is allowed to change system parameters.
Note
To use this function, Item
F
must be enabled first.
Options
Y = yes (to give the user/keyboard the ability to change system parameters);
N = no (to prevent the user/keyboard from changing system parameters).
Use the ACK key to select.
5.3.7.3 Set User
SET USER
PREVIOUS MENU
A
B
SET PRIORITY AND USER
1 SET PRIORITY
2 SET USER
ID - 00 ENABLE
PRIORITY : 8
PASSCODE:
XXXXXX
C
PREVIOUS MENU
The SET USER menu can be used to assign a password-protected
user number and a priority level for each of up to 64 users.
Note:
the menu is not available for non-host matrix switcher.
Item
Function
A
ID
Selects the user to configure. The user is identified by his/her ID number.
To select a user,
1)
Move the cursor to the entry;
2)
Enter the desired user number (01-64) on the numeric keypad;
3)
Press the ACK key to select.
Item
Function
B
PRIORITY
Assign an appropriate priority level to the selected user.
To define the priority level,
1)
Move the cursor to the entry;
2)
Enter the priority level number (01-99) on the numeric keypad;
3)
Press the ACK key to confirm.
Note
Level 99 (default) is the highest level, and Level 1 is the lowest.
Item
Function
C
PASSCODE
Assigns a passcode to the user.
To define a password,
1)
Move the cursor to the entry;
2)
Enter the password (a maximum of six digits) on the numeric keypad;
3)
Press the ACK key to confirm. You will be prompted to verify the password by a
"
VERIFY PASSCODE
" message;
4)
Re-enter the same password as in Step 2;
5)
Press the ACK key to confirm. If the code is not verified, the message
"
**ERROR - REENTER
" will be displayed, and Steps 1 through 4 must be repeated until
successful verification.
