7
27. PATRN/Exit key
28. LCD display panel
29. Four LED indicators
30. Joystick
31. CLEAR/ESC key
The layout of V2117 keyboard is the same as that of V2116.
Covering all the functions of V2116, V2117 keyboard features the
communication with DVR via RS-485 and Ethernet port.
Shortcuts for Matrix CPU and DVR control switching:
RS-232 Control Mode: “1+USER”
Ethernet Control Mode: “2+USER”
DVR RS-485 Control Mode: “3+USER”
DVR Ethernet Control Mode: “4+USER”
4 bits camera number display mode: “5+USER”
8 bits camera number display mode: “6+USER”
12 bits camera number display mode: “7+USER”
When controlling matrix switcher, V2117 and V2116 keyboards are
the same in function.
1
2
3
4
5
6
7
8
9
0
CAM
NEXT
RUN
HOLD
OFF
ARM
ACK
OFF
CLOSE
OPEN
NEAR
FAR
WIDE
TELE
SHOT
MON
PROG
AUX
IRIS
FOCUS
ZOOM
MONITOR
CAMERA
LENS
ENTER
SWITCHER
ALARM
ON
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Infinova
R
Figure 3-4. V2110 Keyboard Layout
(1) Camera key
(2) Monitor key
(3) Numeric keypad
(4) LED Camera Display
(5) LED Monitor Display
(6) Off key
(7)
On
key
(8)
Close
key
(9) Open key
(10) Near key
(11)
Far
key (12)
Wide
key
(13)
Tele
key
(14)
SHOT
key
(15)
Joystick (16)
ACK
key
(17)
ARM
key
(18)
OFF
key
(19) HOLD key
(20) RUN key
(21) NEXT key
(22) PROG key
V2110 provides the basic operation functions only, with no
programming capability.
3.2 Keyboard Password Entry
V2923ACN user password function serves as a security feature to
allow only authorized users to perform system operation. When a
password for a user is assigned (see Chapter V
Menu Programming
– System > Set Priority and User
), V2110 operator keyboard cannot
access the system, while V2117/V2116 system keyboards and 2210
GUI software requires a user to enter a user number and a password
for system access.
Note:
The password 999999 is defaulted to user number 1.
Therefore, it is recommended to change the default password for
system security. Please refer to Chapter V
Menu Programming –
System > Set Priority and User
Menu for details on password
programming.
When a password for a user is assigned successfully, the user must
log on to the system before starting operations.
To log on to the system:
1.
Enter the user number via keypad.
2.
Press the ACK key to confirm. The system will prompt for the
password by displaying the message "PSC" in the keyboard
display.
3.
Enter the user's password via keypad. To clear an incorrect entry,
press the CLEAR key, and enter the correct code.
4.
Press the ACK key to confirm.
5.
If the password verifies, the "PSC" message is cleared, indicating
that the keyboard is ready for system control; if the password
does not verify, the "UC-" message is displayed again (and a
beep is sounded if keyboard sound is enabled), indicating that the
user must re-enter the user number and password.
Note:
1.
When the user log on as “Keyboard”, no user name and
password is needed to operate the system;
2.
When the user log on as “User”, input any user number except
for 0. User number 1 is defaulted.
To log off from the system:
1.
Enter "99" via keypad, and then Press the F1 key
2.
Press the USER key.
3.3 Video Selection
Keyboard control of switching system functions is, generally,
"monitor oriented". To achieve video control function via keyboard,
a monitor is first "called" to a keyboard (i.e., placed under the
control of the keyboard), and then, the desired cameras are called to
that monitor.
Selecting a Monitor
To call a monitor via keyboard:
1.
Press the CLEAR key to clear earlier keyboard inputs.
2.
Enter the number of the desired monitor on the keypad.
3.
Press the MON key to call the monitor.
The number of the called monitor (i.e., the monitor under control)
will be displayed on MONITOR LED (or LCD, depending on the
keyboard used).
Selecting a Camera
To call a camera via keyboard:
1.
Enter the number of the desired camera on the keypad.
2.
Press the CAM key to call the camera.
The number of the called camera (i.e., the camera under control)
will be displayed on CAMERA LED (or LCD, depending on the
keyboard model).
