37
1)
Move the cursor to the first entry of the item;
2)
Enter the first three digits of the 12-digit IP address, and press the ACK key;
Note
: The first three digits various in the range of 001-223, and 127 is unavailable.
3)
Enter the second three digits of the 12-digit IP address, and press the ACK key;
4)
Enter the third three digits of the 12-digit IP address, and press the ACK key;
5)
Enter the last three digits of the 12-digit IP address, and press the ACK key.
Item
Function
E
NET ENCRYPT
To encrypt network communication.
Note
To encrypt network communication in a matrix network, the option in both host matrix and
satellite matrix should be set to “Y”.
Options:
the set range is from 1 to 255.
Y = yes, to encrypt network communication;
N = no, not to encrypt network communication.
Item
Function
F
HOST MATRIX
SITE
Sets the site number for the host matrix switcher in the network system.
Note
If this matrix switcher is selected to be the Host Matrix Switcher, the setting in Item A and the
settings in this item must be the same; if not, it indicates that this matrix switcher is set to be a
non-host matrix switcher.
Options
The setting ranges from 1 to 255.
Item
Function
G
CHANNEL LOCK
TIME
Set the system channel lock time.
Note
The option is available only when the matrix switcher is set as Host Matrix Switcher.
Options
The setting ranges from 1 to 999 (seconds).
Item
Function
H
V2060NET
RETRANSFER
During networking among V2060 matrix switcher, if Y is set, the switching commands sent
from V400 will retransfer to V2060 3 times when it doesn’t reply, while if it replies, will not
retransfer; if N is set, it will not retransfer.
Note:
if retransferred 3 times, and were still no replay, it will not retransfer.
5.7.1.2 Video Trunk Assignments
SATELLITE CONFIGURATION
RETURN MAIN
VIDEO TRUNK ASSIGNMENT
PREVIOUS MENU
OUT IN
ENT SITE MON SITE CAM
0001 001 015 002 2007
0002 001 016 002 2008
0003 002 015 001 0007
0004 002 016 001 0008
0005 002 011 003 3007
0006 002 012 003 3008
0007 003 015 002 2005
0008 003 016 002 2006
1 LOCAL SITE NUMBER
2 VIDEO TRUNK ASSIGNMENT
3 REMOTE SITE IP ADDRESS
VIDEO TRUNK ASSIGNMENT
PREVIOUS MENU
USE LOCK
ENT SITE CAM PRI SITE
0001 001 015 002 ---
0002 001 016 002 ---
0003 002 015 001 ---
0004 002 016 001 ---
0005 002 011 003 ---
0006 002 012 003 ---
0007 003 015 002 ---
0008 003 016 002 ---
A B
C
D
E
Page right
After the site is configured as host matrix switcher, the VIDEO
TRUNK ASSIGNMENT menu allows users to configure all the
video trunks in the system. Please note that when users want to set a
monitor in the system to be a CHANNEL, the use of the monitor
must be set to “CHL” or “CCH” (when networked with
V300/V2060 Series Matrix Switchers) in menu 2.2 FUNCTION in
advance.
Note:
entering “19, F2” directly (in the position of PROGRAM)
can clear the channel settings among sites set in VIDEO TRUNK
ASSIGNMENT menu.
.
