31
5.5.1 Assign Pseudo Cameras
RETURN MAIN
CAMERA
PREVIOUS MENU
REAL PSEUDO R-SITE R-CAM
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
0001 0001 --- ----
ASSIGN PSEUDO CAMERAS
CAMERA
A
B
C
D
PREVIOUS MENU
ASSIGN PSEUDO CAMERAS
CAMERA
PAGE RIGHT
REAL SEC PSEUDO
0001 --------
0002 --------
0003 --------
0004 --------
0005 --------
0006 --------
0007 --------
0008 --------
E
PREVIOUS MENU
ASSIGN PSEUDO CAMERAS
CAMERA
PAGE RIGHT
PSEUDO REFLAC NUM
0001 - - - -
0002 - - - -
0003 - - - -
0004 - - - -
0005 - - - -
0006 - - - -
0007 - - - -
0008 - - - -
F
1 PSEUDO
2 TITLE
3 CAMERA/KEYBOARD
4 BATCH PSEUDO
5 CLEAR SETTING
6 VIDEO LOSS
V2923ACN can assign a Pseudo number to each camera to
facilitate system management. A Pseudo number is the logical
number that the system assigns to a specific camera. By default,
each camera's Pseudo number is the same as its Real number.
Note:
the menu is not available for non-host matrix switcher.
Item
Function
A
REAL
Indicates the Real number of a local camera.
Item
Function
B
PSEUDO
Assigns a Pseudo number to the camera.
To change a camera's Pseudo number,
1)
Move the cursor to the entry;
2)
Enter the desired Pseudo number (1-9999) on the numeric keypad;
3)
Press the ACK key to confirm.
Note:
If Camera A's Real number is chosen as the Pseudo number for Camera B, Camera B's
real number will then be automatically assigned as the Pseudo number for Camera A.
To locate a Pseudo camera number in the menu,
1)
Enter the desired Pseudo number on the numeric keypad;
2)
Press either the CLOSE (page up) or the OPEN (page down) key in the IRIS section of the
keyboard to display the camera entry.
Item
Function
C
R-SITE
The number of the remote site where the camera associated with the PSEUDO in previous entry
locates. The number in this entry can not be set in the range of 1-1024, which is the real number
of local cameras.
Item
Function
D
R-CAM
The real number of the camera at remote site associated with the PSEUDO. The number in this
entry can not be set in the range of 1-1024, which is the real number of local cameras.
Note
In a network with multiple matrix switchers, the PSEUDO for the cameras in non-host matrix
CPUs must be configured in the host matrix CPU. And then the non-host matrix CPU
downloads the relevant menu settings from the host matrix CPU via network.
Item
Function
E
SEC PSEUDO
Assigns another Pseudo number to the camera. It is displayed in 8 digits (1~99999999).
Note
If a camera is assigned a second Pseudo number, this number will be displayed on the system
keyboard.
