Inficon SEN.122.162 Operating Instructions Manual Download Page 41

Page: 41 / 80

INFICON

Info | 12

Sensistor_Sentrac_Strix_Operating_Manual_ninb65en1-01-(2010)

41 / 80

12 Info

12.1 Statistics

12.1.1 Run Time

► To see the current operation time, click Info > Statistics > Run Time.

Two runtime counters can be reset and used for specific needs. The two timers are

also reset when a reset is performed on the instrument.

12.1.2 Calibration

To see information regarding:

• number of calibrations in total

• number of failed calibrations

• date and time of latest calibration

• etc.

► Click Info > Statistics > Calibration.

12.1.3 I•Guide

To see statistics about:

• number of tested objects

• number of accepted tests

• number of rejected tests

► Click Info > Statistics > I•Guide.

12.2 Export/Import

12.2.1 Export

Backup of all useful settings, including recipes, can be exported to an SD-card.

1. Insert an SD-card in the SD-card holder

2. Click Info > Export/Import > Export

3. In Settings, click on the backup to SD-button

A text file is created on the SD-card.

The settings can be imported to any Sentrac instrument.

Summary of Contents for SEN.122.162

















































































Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands

Inficon SEN.122.162, Operating Instructions Manual

Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands