Inficon SEN.122.162 Operating Instructions Manual Download Page 17

Page: 17 / 80

INFICON

Hand Probe | 4

Sensistor_Sentrac_Strix_Operating_Manual_ninb65en1-01-(2010)

17 / 80

4 Hand Probe

NOTICE

Connection and disconnection of the sensor cable must be done with power

off. Sensor can be damaged if power is on.

The Hand Probe is a no-flow probe. Gas sensing takes place in the

replaceable sensor located in the tip of the probe.

4.1 Description

Pos.

Part

Description

Hydrogen Sensor

Detects and measures leaks.

Display

Displays results, information and warnings.

General information

Information depends on customer settings

and applications.

Measuring and locating

information

Shows by value and graphics.

Function Button function

Shows available function.

Function Button

Performs available function.

Lamp

Lights up the measuring surface.

The probe can be ordered with a flexible neck.

Summary of Contents for SEN.122.162

















































































Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands

Inficon SEN.122.162, Operating Instructions Manual

Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands