manualshive.com logo in svg

Inficon SEN.122.162, Operating Instructions Manual, Page: 61 / 80

Share
Download
Inficon SEN.122.162 Operating Instructions Manual Download Page 61

INFICON

Maintenance Instructions | 16

Sensistor_Sentrac_Strix_Operating_Manual_ninb65en1-01-(2010)

61 / 80

16.6 Software Update

1

Download the update software to a computer.

2

Locate the downloaded file. Double click on Setup.exe.

ð

If an older version of the software is already installed, it must be removed.

Follow the given directions.

3

An icon will appear on the desktop when the installation is finished.

4

Connect the instrument to the computer.

ð

Connect the probe to the instrument if the probe-software is to be updated.

5

Double click on the icon on the desktop.

ð

Check for the code [Instrument Serial no.] in the COM port window. If the

code is present, the communication between the computer and the

instrument is set up.

6

Chose which unit to update, instrument or probe.

7

Click “download” to perform the software update.

8

Restart the instrument after completed update.

Summary of Contents for SEN.122.162

















































































Reviews:

No comments