Inficon SEN.122.162 Operating Instructions Manual Download Page 21

Page: 21 / 80

INFICON

Setup | 6

Sensistor_Sentrac_Strix_Operating_Manual_ninb65en1-01-(2010)

21 / 80

6 Setup

WARNING

Make sure all relevant legislation and safety standards are complied with before

putting the instrument into service.

6.1 Placement of the Instrument

Avoid to place the instrument close to hydrogen sources such as cigarette smoke,

combustion engines, aluminium machining, lead battery charging stations and, in

some cases, compressed air systems.

6.2 Connect the Instrument

1. Connect the Hand Probe to the instrument using the probe cable. If you have

purchased another type of probe than the Strix Hand Probe, contact INFICON for

help. Adaptation equipment between probe and instrument may be required.

2. Plug the power cable into the power inlet of the instrument and into the nearest

power socket.

To disconnect the Probe, hold around the knurled part of the connector and

pull straight out. The standard cable length is 3 m. Several different cable

lengths are available. See Spare Parts and Accessories.

Summary of Contents for SEN.122.162

















































































Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands

Inficon SEN.122.162, Operating Instructions Manual

Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands