Inficon SEN.122.162 Operating Instructions Manual Download Page 60

Page: 60 / 80

16 | Maintenance Instructions

INFICON

60 / 80

Sensistor_Sentrac_Strix_Operating_Manual_ninb65en1-01-(2010)

Assembling the Cover

1. Reinstall the cover (C). Make sure that the lock washer on the Probe Connection

Port (LEMO connector on main PCB) is still present. Important for proper

grounding. Make sure that no cables are pinched between the cover and the

chassis.

2. Reinstall and tighten the two screws (B) holding the cover (C). Tighten to 4 Nm.

3. Reinstall the Probe Connection Port nut (A).

4. Use a Spanner for notched nut and tighten the Probe Connection Port nut.

5. Check the resistance between the ground pin in the mains socket and the outside

of the probe cable connector, should be 9 Ω or lower. If not, check the lock washer

on the Probe Connection Port.

Summary of Contents for SEN.122.162

















































































Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands

Inficon SEN.122.162, Operating Instructions Manual

Search results

Summary of Contents for SEN.122.162

Reviews:

Related manuals for SEN.122.162

Brands by name

Popular brands