manualshive.com logo in svg

Inalp Networks SmartWare R2.00, Software Configuration Manual

The Inalp Networks SmartWare R2.00 Software Configuration Manual is a comprehensive guide that provides step-by-step instructions and detailed information on configuring the software. This essential manual is available for free download from our website, allowing users to easily access and master the functionalities of this innovative product.

Share
Download
background image

8  

Table of Contents 

 

17.1 Introduction .................................................................................................................................... 147 
17.2  Basic IP Routing Configuration Task List................................................................................... 148 
17.3 Configuring 

Static IP Routes......................................................................................................... 148 

17.4 Deleting 

Static IP Routes ............................................................................................................... 149 

17.5 Displaying 

IP 

Route Information ................................................................................................. 149 

17.6 Examples ......................................................................................................................................... 150 

17.6.1 Basic 

Static 

IP Routing Example........................................................................................... 150 

18

 

Routing Information Protocol (RIP) Configuration................................................................ 152

 

18.1 Introduction .................................................................................................................................... 152 
18.2 Routing Protocol............................................................................................................................. 152 
18.3 RIP 

Configuration Task List ......................................................................................................... 153 

18.4 Enabling Send RIP.......................................................................................................................... 153 
18.5 Enabling 

an 

Interface to Receive RIP........................................................................................... 154 

18.6 Specifying 

the 

Send RIP Version.................................................................................................. 154 

18.7 Specifying 

the 

Receive RIP Version ............................................................................................. 155 

18.8 Enabling 

RIP Learning................................................................................................................... 155 

18.9 Enabling 

an 

Interface to Receive RIP........................................................................................... 156 

18.10 Enabling RIP Announcing ............................................................................................................ 156 
18.11 Enabling RIP Auto Summarization ............................................................................................. 157 
18.12 Specifying The Default Route Metric .......................................................................................... 158 
18.13  Enabling RIP Split-Horizon Processing....................................................................................... 158 
18.14 Enabling The Poison Reverse Algorithm .................................................................................... 159 
18.15 Enabling Holding Down Aged Routes ....................................................................................... 160 
18.16 Displaying RIP Configuration of an IP Interface ....................................................................... 160 
18.17 Displaying Global RIP Information ............................................................................................. 161 

19

 

Access Control List Configuration............................................................................................. 162

 

19.1 About 

Access Control Lists........................................................................................................... 162 

19.1.1 What 

Access Lists Do............................................................................................................. 162 

19.1.2 

Why You Should Configure Access Lists ........................................................................... 162 

19.1.3 

When to Configure Access Lists........................................................................................... 163 

19.1.4 Features 

of 

Access Control Lists........................................................................................... 163 

19.2  Access Control List Configuration Task List.............................................................................. 164 
19.3  Map Out the Goals of the Access Control List ........................................................................... 164 
19.4  Create an Access Control List Profile and Enter Configuration Mode ................................... 165 
19.5  Add a Filter Rule to the Current Access Control List Profile................................................... 165 
19.6  Add an ICMP Filter Rule to the Current Access Control List Profile ..................................... 166 
19.7  Add a TCP, UDP or SCTP Filter Rule to the Current Access Control List Profile ................ 168 
19.8  Bind and Unbind an Access Control List Profile to an IP Interface ........................................ 170 
19.9  Display an Access Control List Profile ........................................................................................ 172 
19.10  Debug an Access Control List Profile.......................................................................................... 172 
19.11 Examples ......................................................................................................................................... 173 

19.11.1 Deny 

a 

Specific Subnet ...................................................................................................... 173 

20

 

CS Context Overview ................................................................................................................... 175

 

20.1 Introduction .................................................................................................................................... 175 
20.2  CS Context Configuration Task List ............................................................................................ 176 
20.3  Plan the CS Configuration ............................................................................................................ 176 
20.4 Configure 

General CS Settings ..................................................................................................... 178 

20.5 Configure 

Call 

Routing ................................................................................................................. 180 

20.5.1 Create 

and 

Configure CS Interfaces..................................................................................... 180 

20.5.2 Specify 

Call Routing .............................................................................................................. 181 

20.6 Configure 

Dial Tones..................................................................................................................... 181 

20.7 Configure 

Voice 

over IP Parameters ........................................................................................... 181 

Software Configuration Guide, Revision 1.03 

Summary of Contents for SmartWare R2.00


































































































































































































































































































































Reviews:

No comments

Related manuals for SmartWare R2.00

Amazon Appointment Request Portal User Manual preview
Appointment Request Portal
Brand: Amazon Pages: 16
Sanford Dymo Label v.8 User Manual preview
Dymo Label v.8
Brand: Sanford Pages: 122
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Brand: IBM Pages: 46
Sony D-NF610 - Portable Cd Player Specifications preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 1
Sony D-NF420 - Portable Cd Player Specifications preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE718CK - Portable Cd Player Specifications preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 2
Sony D-NE520 - Atrac Cd Walkman Portable Player Specifications preview
D-NE520 - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony CPF-IX001 - Wireless PC-Linked Audio System Installation Manual preview
CPF-IX001 - Wireless PC-Linked Audio System
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Installation & Operating Manual preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 20
Sony D-NE718CK - Portable Cd Player Service Manual preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 36
Sony D-NF420 - Portable Cd Player Service Manual preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 38
Sony D-NF610 - Portable Cd Player Operating Instructions Manual preview
D-NF610 - Portable Cd Player
Brand: Sony Pages: 40
Sony D-NE329SP - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 39
Sony Clie Clie Version 2.0 User Manual preview
Clie Clie Version 2.0
Brand: Sony Pages: 57
Sony D-NE718CK - Portable Cd Player Operating Instructions Manual preview
D-NE718CK - Portable Cd Player
Brand: Sony Pages: 76
Sony D-NE520 - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE520 - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 103
Sony D-NE518CK - Portable Cd Player Operating Instructions Manual preview
D-NE518CK - Portable Cd Player
Brand: Sony Pages: 104
Sony D-NF420 - Portable Cd Player (Spanish) Manual De Instrucciones preview
D-NF420 - Portable Cd Player
Brand: Sony Pages: 112

Brands by name

Popular brands

Load more brands