282
SNMP Configuration
Software Configuration Guide, Revision 1.03
Hosts:
172.16.224.44 security-name public
header sent to the target. In most cases the target is a NMS, which only accepts a SNMP message
header of a certain community.
Procedure
To define a SNMP trap target and enter community name
Mode
Configure
Command
Purpose
Step 1
node
(cfg)#snmp target
IP-address-of-node
security-name
community
Configures a SNMP trap target with IP
address
IP-address-of-node
that
receives
trap messages of this SmartNode 1000
or 2000 series device, using the security
name
community
on the target.
Use the
no
command option to remove s SNMP trap target setting.
Example: Specifying The Default SNMP Trap Target
In the following example the NMS running on host with IP address 172.16.224.44
shall be defined as
SNMP trap target. Since the NMS requires that SNMP message headers have a community of
Not4evEryOne
the security-name argument is set accordingly.
SN2300-01(cfg)#
snmp target 172.16.224.44 security-name Not4evEryOne
28.10 Displaying SNMP Related Information
Displaying the SNMP related configuration settings is often necessary to check configuration
modifications or when determining the behavior of the SNMP agent running on a SmartNode 1000
or 2000 series device.
Procedure
To display information and configuration settings for SNMP
Mode
Configure
Command
Purpose
Step 1
node
(cfg)#show snmp
Displays information and
configuration settings for SNMP
Example: Displaying SNMP Related Information
This example shows how to display SNMP configuration information.
SN2300-01(cfg)#
show snmp
SNMP Information:
hostname : SN2300-01
location : Office, 3rd floor, Inalp Networks
contact : Lorenz Born, Phone 533
Summary of Contents for SmartWare R2.00
Page 2: ......
