Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
66
of
123
Rev 1.0
Table 38:
GigE Vision parameters (continued)
Parameter Name
Type
Value
Access Description
GevPersistentDefaultGateway Integer
RW
Indicates Persistent
gateway IP address to use
on network interface.
GevLinkSpeed
Integer
RO
Indicates the speed of
transmission negotiated by
network interface in Mbps
GevCCP
Enumeration
String
"OpenAccess"
"ExclusiveAccess"
"ControlAccess"
Num.
0
1
2
RW
Grants privilege to an
application
GevPrimaryApplicationSocket Integer
RO
Indicates the UDP source
port of the primary
application.
GevPrimaryApplicationIPAddre
ss
Integer
RO
Indicates the address of the
primary application.
GevMCPHostPort
Integer
RW
Controls the port to which
the camera must send
messages. Setting this value
to 0 closes the message
channel.
GevMCDA
Integer
RW
Controls the destination IP
address for the message
channel.
GevMCTT
Integer
RW
Provides the message
channel transmission
timeout value in
milliseconds.
GevMCRC
Integer
RW
Controls the number of
retransmissions allowed
when a message channel
message times out.
GevMCSP
Integer
RO
This feature indicates the
source port for the
message channel.
GevSCCFGUnconditionalStream
ing
Boolean
(RW) Enables the camera to
continue to stream, for this
stream channel, if its
control channel is closed or
regardless of the reception
of any ICMP messages
(such as destination
unreachable messages).
