Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
69
of
123
Rev 1.0
Event Control
Event Control allows you to notify a host application (IpxPlayer or a third-party application)
about the events occurred (start or end of the acquisition, dropped frames, rising edge of a
signal on the camera’s input or output).
Table 40:
Event Control parameters
Parameter Name Type
Value
Access Description
EventSelector
Enumeration
String
"AcquisitionStart"
"AcquisitionEnd"
"Stream0TransferIntDrop"
"MessageTransferOverflow"
"IN1"
"IN2"
"OUT1"
"OUT2"
Num.
0x9105
0x9106
0x9107
0x9108
0x9101
0x9102
0x9103
0x9104
RW
Selects which Event
to signal to the host
application
EventNotification Enumeration
String
"Off"
"On"
Num.
0
1
RW
Activate or
deactivate the
notification to the
host application of
the occurrence of
the selected Event.
1
EventSelrctor
values:
•
AcquisitionStart
– Device just started the acquisition of one or many frames.
•
AcquisitionEnd
– Device just completed the acquisition of one or many frames.
•
Stream0TransferIntDrop
– Stream channel internal drop.
•
MessageTransferOverflow
– Message channel FIFO overflow.
•
IN1
– The event will be generated when a Rising Edge is detected on the Hardware
Input Line GP IN 1 (TRIGGER 1)
•
IN2
– The event will be generated when a Rising Edge is detected on the Hardware
Input Line GP IN 2(TRIGGER 2) (IN2 event is supported by the POE-C2010, POE-C2410,
POE-C3210, POE-C4010, POE-C4110, POE-C4410, POE-C5410, and POE-C6410
cameras).
•
OUT1
– The event will be generated when a Rising Edge is detected on the Hardware
Output Line GP OUT 1 (STROBE 1).
•
OUT2
– The event will be generated when a Rising Edge is detected on the Hardware
Output Line GP OUT 2 (STROBE 2) (OUT2 event is supported by all cameras except for
POE-C2000 and POE-C2400 models).
