Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
30
of
123
Rev 1.0
2.5 Camera LED Status Indicator
The camera has a red-green-yellow LED on the back panel of the camera. The following LED
colors and light patterns indicate the camera status and mode of operation:
Table 14:
LED status Indicator Descriptions
LED Condition
Status Indication
Green steady ON
Normal operation. You should see a normal image coming
out of the camera.
Green blinks at ~0.5 Hz
Trigger enabled.
Green blinks at ~2.0 Hz
Long integration enabled.
Amber steady ON
Test mode. You should see one of the test patterns.
Amber blinks at ~0.5 Hz
Camera is in AGC/AEC mode. In this mode, changing the
shutter slider does not affect image luminance.
Amber blinks at ~2.0 Hz
Camera receives an external synchronization pulse
Red steady ON
Communications or firmware load error.*
Red blinks at ~2.0 Hz
Power failure
Green – Red blinks at ~1 Hz GigE Vision firmware error.
LED OFF
Power not present. Possible power supply failure or faulty
external AC adapter. Re-power camera and load factory
settings. If the LED is still OFF, contact the factory.
2.6 POE and External Power Supply
The camera can be powered using Local Area Network power, an external POE injector or an
external Power Supply providing 6 V to 30 V DC with an inrush current capability of
1.5 A @ 12 V DC. If both a POE injector and external Power Supply are connected to the
camera simultaneously, the camera will draw power from the external Power Supply, as long
as the input voltage exceeds 12.6 V. If the external voltage drops below 12.6 V, the camera
will draw power from the Power Injector.
Imperx offers the PS12V04A universal Power Supply adapter for use with the following
cameras: POE-C2010, POE-C2410, POE-C3210, POE-C4010, POE-C4110, POE-C4410,
POE-C5410, and POE-C6410 (see
2.6.1 PS12V04A Standard Power Supply
).
The PS12V04A Power Supply can be purchased separately. It ships with a power cable that
terminates in a female HIROSE plug #HR10A-10P-12S(73). The PS12V04A includes connectors
for trigger (black wire) and strobe (white wire).
Imperx does not offer an external Power Supply for use with the C2000 and C2400 cameras,
but does offer a cable assembly (P/N: CBL-COM01, Input/Output, 6-pin Hirose to
unterminated cable, 2 meters long, see
) so you can connect the camera to an
external Power Supply and make connections to the trigger Input or Strobe Output.
Imperx does not offer an external Power Supply for use with the P67-C2010, P67-C2410,
P67-C3210, P67-C4010, and P67-C4110 cameras. Use cables featuring IP67-rated connectors
for I/O and Ethernet interfaces.
