Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
47
of
123
Rev 1.0
P67 Cameras Lens Tubes
Imperx offers IP67 C-mount lens tubes of 50 mm (standard) and 70 mm (optional) diameters
to be used with varying lens sizes (see
). The tube length varies and can be customized
to match your specific requirements.
Table 17:
Lens tube specifications
Specifications
50 mm Tube (Standard)
70 mm Tube (Optional)
Inner diameter
44 mm
64 mm
Outer diameter
50
70 mm
Inner length (default)
(Length can be customized)
50 mm
80 mm
Glass
Round Clear Glass
Ø
49 mm x 2 mm
with oleophobic coating
Round Clear Glass
Ø
69 mm x 2 mm
with oleophobic coating
2.10 Environmental
Operate the POE cameras in a dry environment with temperatures between -30 °C and +75 °C
(-30 °C and +70 °C for C2000 and C2400). Relative humidity should not exceed 90% non-
condensing.
P67 cameras have an IP67 rating and when connected to appropriate IP67 cables can be
submerged in water to 1-meter depth for 30 minutes. The P67 cameras should never be
submerged or subjected to directed water spray unless IP67 cables are attached to the
camera!
Always keep the camera within temperature specifications.
The camera should be stored in a dry environment with the temperature ranging from
-40 °C to + 85 °C.
1.
Avoid direct exposure to moisture and liquids. The camera housing is not
hermetically sealed and any exposure to liquids may damage the camera
electronics!
2.
Avoid operating in an environment without any air circulation, in close proximity to
an intensive heat source, strong magnetic or electric fields.
3.
Avoid touching or cleaning the front surface of the optical sensor. If the sensor
needs cleaning, use soft lint free cloth and an optical cleaning fluid.
Do not use methylated alcohol!
Contact Imperx support for cleaning procedures.
CAUTION
!
CAUTION
!
