Imperx Cheetah Pregius POE-C2000, User Manual

Page: 67 / 123

Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019 Page
67 of 123
Rev 1.0
Table 38: GigE Vision parameters (continued)
Parameter Name Type Value Access Description
GevSCPHostPort Integer RW Indicates the port to which
the device must send data
stream.
GevSCPSFireTestPacket Command RW When this bit is set, the
device will fire one test
packet.
GevSCPSDoNotFragment Boolean RW This bit is copied into the
"do not fragment" bit of IP
header of each stream
packet.
GevSCPD Integer RW Indicates the delay (in
timestamp counter unit) to
insert between each packet
for this stream channel.
GevSCDA Integer RW indicates the destination IP
address for this stream
channel.
GevSCPSPacketSize Integer Min: 72
Max: 16260
RW The stream packet size to
send on this channel,
except for data leader and
data trailer; and the last
data packet which might be
of smaller size (since packet
size is not necessarily a
multiple of block size for
stream channel).
GevHeartbeatTimeout Integer Min: 500
Max: 4294967295
RW This feature indicates the
current heartbeat timeout
in milliseconds.
GevTimestampTickFrequency Integer RO This 64-bit feature indicates
the number of timestamp
ticks during 1 second.
GevTimestampControlLatch Command WO Latch current timestamp
counter into "Timestamp
value" register.
GevTimestampControlReset Command WO Reset timestamp 64-bit
counter to 0.
GevTimestampValue Integer RO Reports the latched 64-bit
value of the timestamp
counter.