Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
89
of
123
Rev 1.0
Data Correction Controls
These parameters enable data correction and image improvements with Look-up tables and
file corrections.
Figure 53:
Data correction parameters
LUTEnable
Selects LUT to be used in processing image (LUT1 – LUT4).
FFCEnable
Selects FFC to be used in processing image. FFC1 has a factory preset
correction. FFC2 can be created and loaded by the User.
BadPixelCorrection
Provides the following correction modes: Factory, Dynamic, Factory
and Dynamic, User, User and Dynamic.
BadPixelThreshold
Sets the threshold for dynamic bad pixel correction. The sensitivity
increases as the value decreases. You should set the BadPixelThreshold
using the longest expected exposure time with the longest expected
frame time at the maximum expected ambient temperature. The camera
should be warmed up for 10 minutes prior to determining the desired
threshold.
NegativeImage
Inverts the image from positive to negative.
ReverseX
Horizontally flips the image sent by the camera. The AOI is applied after
the flipping.
ReverseY
Vertically flips the image sent by the camera. The AOI is applied after the
flipping.
BitShift
Shifts the data output bits left or right. Options are: NoShift, OneBitRight,
TwoBitsRight, ThreeBitsRight, FourBitsRight, FiveBitsRight, SixBitsRight,
SevenBitsRight, OneBitLeft, TwoBitsLeft, ThreeBitsLeft, FourBitsLeft,
FiveBitsLeft, SixBitsLeft, SevenBitsLeft.
