Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
82
of
135
Rev 7.2
Out1:
External Output 1 can be mapped to the following:
No Mapping, Trigger Input (Mirror), Pulse Generator, Strobe 1 or Strobe 2
Out1 Polarity
:
External Output 1 polarity can be changed to be active High or Low.
Out2:
External Output 2 can be mapped to the following:
No Mapping, Trigger Input (Mirror), Pulse Generator, Strobe 1 or Strobe 2
Out2 Polarity:
External Output 2 polarity can be changed to be active High or Low.
4.7.5 Data Output
Data Output window provides full control of the camera digital data output.
Figure 46: Data output window.
Camera Link Settings
:
Sets the data format and camera speed. Refer to Chapter 2 for more information.
Taps
:
Sets the number of image taps used in the current configuration. These are Camera Link
Output Taps. In some cameras, the tap selection is not available:
A: 1-Tap: Camera Link (CL) Base mode. Single – only one CL tap is used. (24-bits)
B: 2-Taps: Camera Link Base (24-bits)
C: 4-Taps: Camera Link (48-bits)
D: 8-Taps: Camera Link Full (72-bits)
E: 10-Taps: Camera Link Deca (80-bits)
Depth:
Sets the output data bit depth, i.e., the number of output bits per pixel and mapped to
the camera link output. Options are 8, 10 or 12 bits.
