Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
64
of
135
Rev 7.2
WBC Blue Coefficient
This register contains the white balance correction coefficients for Blue. In manual mode,
the user enters the value, in Once or Auto, the camera returns the actual (calculated)
coefficient. Coefficient values range from 0.000 (0 Hex) to +15.996 (FFF Hex) in steps of
0.004 (4096 steps).
Address
:
0x0548
Data (0:11)
:
<value> - WBC Blue
Data (31:12)
:
N/A
3.2.15 Data Correction Workspace Registers
LUT Select
This register selects which LUT will be used – LUT1 or LUT2.
Address
:
0x0410
Data (0)
:
0 – LUT #1 selected
1 – LUT #2 selected
Data (31:1)
:
N/A
LUT Enable
This register enables the selected LUT.
Address
:
0x0414
Data (0)
:
0 – disable
1 – enable
Data (31:1)
:
N/A
Defective Pixel Correction (DPC) Enable
This register enables the DPC (Defective Pixel Correction).
Address
:
0x0418
Data (1:0)
:
00 – DPC disable
01 – Static DPC enable
10 – Dynamic DPC enable
11 – Static and Dynamic DPC enable
Data (31:2)
:
N/A
HPC Enable
This register enables the HPC (Hot Pixel Correction).
Address
:
0x041C
Data (1:0)
:
00 – HPC disable
01 – Static HPC enable
10 – Dynamic HPC enable
11 – Static and Dynamic HPC enable
Data (31:2)
:
N/A
