Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
17
of
135
Rev 7.2
1.4 Ordering Information
Cheetah C4080, C2880 Ordering Codes
Sample Code: CXP-C4080M-RF000
Sensor Manufacturer: ON Semiconductor
Interface
Camera
Number
Sensor Type
Lens Mount
Filter Option
CLF –
Camera
Link Full
C4080 –
4000 x 3000
C2880 –
2832 x 2128
M – monochrome
C - color
C – C-Mount (C2880 only)
F – F-Mount
B – Birger
M – M42
E – Canon EF EOS passive
0 - none
2 – Color w/out filters (C-, F-Mount)
3 – Color w/front CG filter (C-Mount)
4 – Mono w/front CG filter (F-Mount)
5 – Mono with Front IR filter (C-Mount)
6 – Mono with Front CG filter (C-Mount)
7 – Mono with Front CG filter (F-Mount)
8 – Mono with Front IR filter (F-Mount)
A – Mono with rear CG filter (F-Mount)
B – Mono with rear IR filter (F-Mount)
C – Color with rear CG filter F-Mount)
D – Color with rear IR filter (F-Mount)
NOTE: For custom camera configurations, contact Imperx, Inc.
1.5 Technical Support
Imperx tests each camera before shipping. If the camera is not operational after power
up, check the following:
1.
Check all cables. Make sure that all connectors are firmly attached.
2.
Check the status LED and verify that it is steady ON. If it is not, refer to the
LED section.
3.
Enable test mode and verify that the communication between the output
interface and the camera is established. If the test pattern is not present,
power off the camera, check all the cabling, CoaXPress settings, and
computer status.
4.
If you still have problems with the camera operation, contact technical
support at:
Toll Free 1 (866) 849-1662 or (+1) 561-989-0006
Fax: (+1) 561-989-0045
