Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
71
of
135
Rev 7.2
Figure 33: Command terminal.
Cheetah Download Utility (BUM):
One of the great features about the Cheetah is the separate Cheetah Download Manager.
This separates the powerful features of uploading LUTs, Firmware, Defective Pixel Map
and Hot Pixel Map.
Soft Reset:
Re-initializes the camera similar to cycling power to the camera.
Connection:
The user can select the connection type between the camera and the computer:
Switch Port – If checked, “Select Port” window will popup. The user can select new
CamLink port, which connect to current camera.
Set Baud Rate – the user can set the communication baud rate: 9600, 19200, 38400,
57600 or 115200 (default value).
Exit:
Terminates the application.
