Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
60
of
135
Rev 7.2
3.2.10 Pulse Generator Workspace Registers
Pulse Generator Timing Granularity
This register sets the pulse generator main timing resolution. The main resolution is in
microseconds, and 4 granularity steps are possible – x1, x10, x100, x1000 (x1000 is equal to
1ms timing resolution).
Address
:
0x0690
Data (1:0)
:
00 – x1
01 – x10
10 – x100
11 – x1000
Data (31:2)
:
N/A
Pulse Generator Pulse Width
This register sets the value of the pulse width in microseconds.
Address
:
0x0694
Data (18:0)
:
<value> – pulse width in microseconds
Data (31:19)
:
N/A
Pulse Generator Pulse Period
This register sets the value of the pulse period in microseconds.
Address
:
0x0698
Data (19:0)
:
<value> – pulse width in microseconds
Data (31:20)
:
N/A
Pulse Generator Number of Pulses
This register sets the number of the pulses generated when the Pulse Generator Mode is
set to Burst Mode (discrete number of pulses)
Address
:
0x069C
Data (15:0)
:
<value> – number of discrete pulses
Data (31:16)
:
N/A
Pulse Generator Mode
This register sets the Pulse Generator to either continuous mode or burst mode.
Address
:
0x06A4
Data (0)
:
0 – Continuous Mode - continuous pulse generation
1 – Burst Mode - Generate discrete number of pulses (see
Pulse Generator Number of Pulses
section, register 0x069C)
Data(31:1)
:
N/A
