Cheetah KAC Camera User Manual | Camera Link (CLF) Interface
October 1, 2019
Page
20
of
135
Rev 7.2
Figure 11: PS12V04A power supply assembly.
2.2 Camera Power and Data Connector
The male 12-pin Hirose connector provides power and all external input/output signals
supplied to the camera. Refer to the following Figure for connector pin-outs. Refer to the
Following Table for corresponding pin mapping. The connector is a male HIROSE type
miniature locking receptacle #HR10A-10R-12PB (71). The optionally purchased power
supply is shipped with a power cable which terminates in a female HIROSE plug #HR10A-
10P-12S(73).
The output interface requires a frame grabber for collecting and storing the camera’s
output. The frame grabber installs in the host computer. It enables you to view images
and configure the camera.
Figure 12: Camera I/O Connector Pin-outs.
