D
x
Telemetry System
Manual Vers. 2.7
52
/
92
4.2.8 Menu: CAN Setup
Rem. Ctrl
This function allows other devices to remotely activate
“Autozero” or “Shunt test” on your
D
X
system.
Id:
(Autozero Message)
Enter the desired CAN-Id for the "Autozero Message" in decimal or
hexadecimal.
Id:
(Shunt Message)
Enter the desired CAN-Id for the "Shunt Message" in decimal or
hexadecimal.
hex:
Switch the CAN-Id between decimal and hexadecimal.
active:
Activate the message. The message will be received via the CAN
only if this box has been ticked.
Bit Position:
Indicates the Bit position for the remote-controlled messages
(Autozero and Shunt).
Please note: In order to change settings permanently, you have to record your current
configuration with the
Save
button in the menu
Load/Save
