cDVR User Guide, Release 2.0
60
Configuration - Nodes Sub-tab
Nodes
Sub
‐
tab
The
NODES
sub-tab is accessed by clicking through to
CONFIGURATION > NODES
. The NODES
menu is where you will configure the bulk of your initial setup parameters including transcoders, JITP
servers, storage mounts, and Recorders.
The following server components are described in this section:
•
•
•
•
•
•
Each of these components is discussed in detail in
“Solution Overview” on page 19
. This section
describes GUI configuration parameters for each container listed above.
Transcoders
Container
The
TRANSCODERS
container allows you to set up one or more transcoding devices that will be used
for cDVR input. You can use an Imagine Communications transcoder, such as the Selenio
TM
VMG or
Selenio
TM
TAT, or you can use a third party transcoder.
To view the
Transcoders
container, navigate to:
