cDVR User Guide, Release 2.0
38
RM Redundancy Setup - Removing RM Redundancy
13.
In the
Host IP
field, enter the IP address of the Standby RM.
14.
The
Host Type
drop-down menu should already be preselected to
Standby
.
15.
Click
Submit
to save and add the Standby RM to the redundancy group.
Verify
Redundancy
16.
From the
System
tab, click the triangle [
] symbol next to the
Redundancy
container to expand
the menu, then click on
Group
.
17.
Verify the
host_type
and
host_state
for the Primary RM show
Active/Active
as their entries.
18.
Verify the
host_type
and
host_state
for the Standby RM show
Standby/Idle
as their entries.
Redundancy
States
(More
Information)
For more information on the redundancy states and their meanings, refer to the section titled,
Removing
RM
Redundancy
There are two levels of redundancy removal, depending on whether you wish to remove only the
standby host, or redundancy altogether.
