Imagine CloudXtream, User Manual

Page: 27 / 166

cDVR User Guide, Release 2.0 27
cDVR Initial Setup - Storage Node Configuration
Storage Node Configuration
If you are using cDVR for Private Copy, setting up one or more storage node(s) requires the following
software / hardware components:
Recommended Hardware:
•
HP Apollo 4520 recommended
Software:
•
PCE (Private Copy Engine) application — one or more instances (bjmh-2.0-
xxxxxx.rgb.x86_64.rampx)
•
PLLB (Playlist Load Balancer) application — one or more instances (plb-1.0.0-xx.elx.x86_64.rampx)
Storage System Type Configuration (Shared Copy)
When using the system in Shared Copy Mode, depending on which type of storage server you are
using, additional configuration may be necessary for the routing devices in your network. Follow the
guidelines listed below for the applicable storage server.
NFS Port Configuration
When using NFS or NFS4 as a storage server, the cDVR solution requires that certain ports be available
for communication. Table 4 below provides a list of protocols/components and their corresponding
communication ports.
Table 4. Communication port usage for cDVR
Application
Communication
Direction
Communication
Target Protocol Port Number
XMLRPC API Unidirectional Recording Manager XMLRPC 80 & 443
Recording Manager Bidirectional Recording Manager UDP
Multicast
Safenet UDP 9036
12344-12346
5093
Recording Manager Unidirectional Recorder XMLRPC 80 & 443
Recording Manager Unidirectional JITP Server
(Packager) XMLRPC 80 & 443
Recording Manager Unidirectional NAS-NFS NFS NFS
Recorder Bidirectional Recorder UDP
UDP
Multicast 9047
9036
12344-12346
Recorder Unidirectional Recording Manager XMLRPC 80 & 443
Recorder Unidirectional NAS-NFS NFS NFS
Origin Unidirectional JITP Server
(Packager) HTTP Content served
from JITP 80