Illustra Flex Series Installation and Configuration Guide
8200-1456-01 D0
85
5
Enter the word or phrase that you would like to search for in the
Filter (only lines
containing text)
text box.
6
Select
Refresh
to refresh the log for the most up-to-date information that meets the filter
parameters.
7
Select
Clear
to empty the log of its current entries. You will be required to enter your
password to do this.
- End -
Users
In this section you are able to add a user, change a user password and a delete user account. There
are three levels of access: admin, operator and user.
Refer to Appendix A: User Account Access on page 115 for details on the features which are
available to each role.
Note:
The default Username is
admin
and the default Password is
admin
. To maintain security the
password on the admin account should be changed.
View Current User Accounts
View a list of the current user accounts assigned to the camera.
Procedure 101 View User Accounts
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Users
from the
Security
menu.
The current user accounts assigned to the camera display.
- End -
Add User
Add a new user account to allow access to the camera.
Procedure 102 Add a User
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Users
from the
Security
menu.
3
Select the
Add User
tab.
4
Enter a User Name in the
Name
text box.
The username must start with a letter and can be followed by any alphanumeric values (a-z,
A-Z, 0-9) and the following special characters, underscore(_), dash(-), or dot(.)
5
Select a
Role
:
• admin
• operator
• user
