Illustra Flex Series Installation and Configuration Guide
58
8200-1456-01 D0
7
If MJPEG has been selected, MJPEG Quality enables. Use the slider bar to select the
MJPEG Quality
.
The default setting is 50.
OR
8
If H264 has been selected in step 4, Rate Control will be enabled. Select the required
Rate
Control
by selecting the radio buttons:
• VBR (Variable Bit Rate)
• CBR (Constant Bit Rate)
• CVBR (Constrained Variable Bit Rate)
The default setting is ‘CVBR’.
a
If VBR has been selected, VBR Quality is enabled. Select the required
VBR Quality
from the drop-down menu. The default setting is ‘High’.
•
Highest
•
High
•
Medium
•
Low
•
Lowest
OR
b
If CBR has been selected, CBR Bit Rate will be enabled. Use the slider bar to select
the
CBR Bit Rate
. The default setting is 1000.
OR
c
If you select CVBR, Max Bit Rate is enabled. Use the slider bar to select the
Max Bit
Rate
. The default setting is 8000.
- End -
Picture Settings
Picture Basic
Adjust the Picture Rotation, Focus / Zoom, Exposure and White Balance settings.
Picture Rotation
Configure the orientation and corridor mode settings. Both settings are optional.
Procedure 55 Configure Orientation Settings
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select the
Picture Basic
tab from the
Video
menu.
3
Select the required
Orientation
setting:
•
Mirror
•
Flip
