Illustra Flex Series Installation and Configuration Guide
102
8200-1456-01 D0
Procedure 126 Resetting the Camera
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Maintenance
from the
System
menu.
3
Select the
Preserve IP address
check box to retain the current network settings during the
camera reset.
OR
Deselect the
Preserve IP address
check box to restore the default networking settings.
The default setting is ‘Enabled’.
4
Select
Reboot
You will be prompted to confirm the camera reset.
• Select
OK
to confirm. The Web User Interface will display a “Camera
Resetting” page with a progress bar showing the reboot progress.
• When the camera is restarted it will take 2 - 3 minutes until it is online
and ready to be accessed and controlled.
OR
Select
Cancel
.
5
The Log in page displays.
- End -
Reboot
To perform a physical reset of the camera, refer to the chapter regarding your camera model in this
guide.
Procedure 127 Reboot the Camera
Step Action
1
Select
Setup
on the Web User Interface banner to display the setup menus.
2
Select
Maintenance
from the
System
menu.
3
Select
Reboot
.
You will be prompted to confirm the camera reboot.
4
Select
OK
to confirm.
The Web User Interface will display a “Camera Rebooting” page with a progress bar
showing the reboot progress.
When the camera is restarted it will take 2 - 3 minutes until it is online and ready to be
accessed and controlled.
OR
Select
Cancel
.
5
The Log in page displays.
